Laser equipment usually refers to a processing tool for industrial processing, such as common laser cutting machines, laser marking machines, laser welding machines, laser engraving machines, etc., which are common and commonly used femto laser cutting equipment in various industries. Among these laser equipment, there are considerable differences between nanosecond, picosecond and femtosecond lasers.
The time unit conversion is as follows:
1ms (millisecond)=0.001 second=10-3 seconds
1μs (microsecond) = 0.000001 = 10-6 seconds 1ns (nanosecond) = 0.0000000001 second = 10-9 seconds 1ps (picosecond) = 0.0000000000001 second = 10-12 seconds 1fs (femtosecond) = 0.000000000000001 second = 10-15 Second
Normally, laser equipment processing is a single pulse of energy that acts on the material surface in a very short time, forming drilling, cutting, marking, welding and other applications through high-frequency repetitive work. Through the above time unit conversion introduction, we can understand that the nanosecond, picosecond, and femtosecond laser equipment often seen in the market are named based on time. According to the processing requirements of different materials, the corresponding nanosecond, picosecond, and femtosecond laser equipment can be selected. Picosecond and stent laser cutting equipment processing. The shorter the time, the shorter the time the laser acts on the material surface, the smaller the impact on the material surface, and the better the processing effect.
Picosecond laser circuit board design has been widely used. Picosecond laser can complete hole processing by impact drilling and ensure the uniformity of holes. In addition to circuit boards, picosecond lasers can also perform high-quality drilling on materials such as plastic films, semiconductors, metal films, and sapphire.
Laser equipment with nanosecond pulse widths is suitable for micromachining applications and can accurately remove coatings without damaging or slightly damaging the base material.
Femtosecond UV laser cutting machines are often used for processing brittle materials, and femtosecond UV laser cutting machines are used for processing conductive thin film oxides and other materials.
Laser processing equipment is an integrated comprehensive scientific equipment. Nanosecond, picosecond, and femtosecond are only one part of it. They are pulse time units. They also include single pulse energy, pulse width, pulse frequency, pulse peak power, etc. Various other factors, under different processing conditions, choose different time units, so there are naming rules for nanosecond, picosecond, and femtosecond laser equipment.
Our journey started in 2003 when extensive research in femtosecond laser micromachining began. Since the beginning, we are continually investing in research, striving to always be in front of micron-scale challenges.
Today BE-CU.COM are among the top femtosecond laser micromachining and cnc machining providers for industry and science customers around the globe, delivering fully integrated services from feasibility and prototyping to actual solutions – micromachining services and tailor-made laser workstations.
Our passion, dedication, and hard work led to the deep know-how we can offer you today – send us your µ task, and we will deliver a solution.Our company has created parts for over 500 companies and offered them the best Service.Be-Cu provides the highest standard of laser cutting service for all your needs. Contact us today to know more about what we offer!
- Sales: Bella
- Web:be-cu.com
- Phone: +86 151 1280 7161
- Email: info@be-cu.com
- Affiliated: Be-cu Prototype
- Address: Dongguan,China
